home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.20041116-20060924
/
000092_arthur.marsh@internode.on.net_Fri Apr 22 10:25:08 2005.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Date: Fri, 22 Apr 2005 08:43:02 +0930
From: Arthur Marsh <arthur.marsh@internode.on.net>
Organization: what organisation
User-Agent: Mozilla/5.0 (X11; U; Linux i586; en-GB; rv:1.7.7) Gecko/20050420 Debian/1.7.7-2
X-Accept-Language: en, en-us
MIME-Version: 1.0
Newsgroups: comp.protocols.kermit.misc
Subject: Re: telnet
References: <1114078012.787328.171890@l41g2000cwc.googlegroups.com>
In-Reply-To: <1114078012.787328.171890@l41g2000cwc.googlegroups.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
NNTP-Posting-Host: ppp1139.adelaide.on.net.au
Message-ID: <426833c1@duster.adelaide.on.net>
X-Trace: duster.adelaide.on.net 1114125249 150.101.64.114 (22 Apr 2005 08:44:09 +0950)
Lines: 36
Path: newsmaster.cc.columbia.edu!newsfeed.nyu.edu!router1.news.adelphia.net!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!news.moat.net!quokka.wn.com.au!figjam.pipenetworks.com!duster.adelaide.on.net!not-for-mail
Xref: newsmaster.cc.columbia.edu comp.protocols.kermit.misc:15328
In addition to Jeffery and Frank's instructions, bear in mind that on
some systems, telneting in as root is disabled as a security measure.
Arthur.
vikrant.shahir@gmail.com wrote:
> I am issuing "set host" to get connected to other computer through
> kermit.
> When i issue set host <ip>, it should idealy prompt for "login" and
> then followed by "password".
> But when i issue set host <ip> it issues "password prompt"(plz refer
> below) and then when i try to enter the root password, it flashes login
> incorrect .
> After this it gives login prompt.
>
> can i get a solution where i get login first and then password prompt
>
> START: for reference
>
> (/root/) C-Kermit>set host /connect /network-type:tcp/ip 192.168.0.12
> Trying 192.168.0.12... Reverse DNS Lookup... Failed.
> Connecting to host 192.168.0.12
> Escape character: Ctrl-\ (ASCII 28, FS): enabled
> Type the escape character followed by C to get back,
> or followed by ? to see other options.
> ----------------------------------------------------
> Password:
> Login incorrect
>
>
> login:
> END: for reference
>
>
> vikrant
>